Benchtop Centrifuges
Benchtop Centrifuges
Compact centrifuges designed to fit on lab workbenches and other smaller stations for general and special purposes, clinical settings, and more. Includes a wide variety of rotor and speed combinations. Also includes accessories and replacement parts.
Centrifuges are often placed on the benchtop or work surface for easy and immediate access. Options include general-purpose, clinical, compact, and special-purpose benchtop centrifuges.
These devices may be ventilated (operated without temperature controls), refrigerated, or heated. Units may be sold with or without rotors, and rotor options may also be available. The choice of rotor will determine the maximum number of samples that can be processed simultaneously and will help determine the maximum g-force or speed that can be achieved.
In fixed-angle rotors, the tubes remain the same angled position while being spun. In contrast, as the rotational speed increases, samples in swinging bucket rotors spin in a horizontal position. The type of rotor also affects where the solids 'pellet' forms — on the side (fixed-angle) or the bottom (swinging-bucket) of the tube. Swinging-bucket rotors can also tolerate higher speeds, an important factor when separating biological macromolecules.
Filtered Search Results
Thermo Scientific™ Medifuge™ Small Benchtop Centrifuge
Perform both routine clinical and life science separations with this compact centrifuge and the unique DualSpin rotor featuring a 2-in-1 hybrid design.
Max. Speed | 4,900 rpm |
---|---|
Description | Medifuge Centrifuge |
Program Storage | Yes, 4 program memory |
Profile (Acceleration/Braking) | 1 accel (standard)/3 decel (standard, soft, brake-off) |
Controller Type | Microprocessor |
Wattage | 130 w |
Length (Metric) Exterior | 450 mm |
Max. RCF | 3,114 x g (Fixed Angle); 3,490 x g (Swinging Bucket) |
Safety Features | Lid lock, steel armored ring, view port for speed calibration, lid emergency release |
Height (Metric) Exterior | 240 mm |
Dimensions (HWD) | 9.5 x 12.8 x 17.7 in. (24 x 32.5 x 45 cm) |
Includes | DualSpin rotor body, fixed angle buckets (set of 8), swinging buckets (set of 8), green/short spacers (set of 8), yellow/long spacers (set of 8) |
Width (Metric) Exterior | 325 mm |
Noise Level | <56 dB(A) (swinging bucket) |
Height (Metric) Exterior Lid Open | 510 mm |
Drive System | Induction drive |
Refrigerated | No |
Capacity | 8 x 15mL (Fixed Angle), 8 x 10 mL (Swinging Bucket) |
Temperature Range | 2°C to 40°C |
Run Time | 1-99 minutes, in increments of 1 minute; HOLD |
Certifications/Compliance | UL, CE, RoHS, CSA, IVD, FDA class 1 |
Net Weight | 34.1 lb. (15.5 kg) |
Product Line | Medifuge |
Display | Large, Bright LED |
Thermo Scientific™ Multifuge X4 and X4R Pro Centrifuges
High footprint-to-capacity ratio with a Pro series touch screen for faster processing and programming, ideal for multi-use applications requiring more rotor choices, speeds and programming capacity.
Laboratory/Cleanroom Use | Cleanroom compatibility Class ISO 7 according to DIN EN ISO 14644-1 |
---|---|
Type | Benchtop Centrifuge |
Program Storage | Up to 100 Programs, including multi-step programming via Touch Screen; Including programmabile Pulse options |
Drive System | Direct, Brushless Induction Low Profile |
Profile (Acceleration/Braking) | Choices of 9 Accel/10 Decel Rates |
Controller Type | Microprocessor |
Run Time | Up to 99 hr. 59 min. 59 sec. |
Standards | ISO 14971, ISO 13485, ISO 9001 |
Display | Full Color Touch Screen Interface |
Product Line | Multifuge |
Fisherbrand™ Centrifuge GT2 Expert Package
Waste no time finding the right part numbers for your application! Fisherbrand™ Centrifuge GT2 Expert Package is an application driven centrifuge package to insure convenient, fast ordering of all components necessary to run a specific protocol.
Electrical Requirements | 50/60 Hz |
---|---|
Type | Centrifuge Package |
Max. RCF | 25,830 x g |
Rotor | Yes |
Product Line | Fisherbrand |
Fisherbrand™ Centrifuge GT4 Expert Cell Culture Package
Waste no time finding the right part numbers for your application! The Fisherbrand™ Centrifuge GT4 Expert Package is an application driven centrifuge package to insure convenient, fast ordering of all components necessary to run a specific protocol.
Electrical Requirements | 50/60 Hz |
---|---|
Voltage | 200/230 V |
Max. RCF | 25,830 x g |
Rotor | Yes |
Product Line | Fisherbrand |
Fisherbrand™ GT1 Benchtop Centrifuge Packs
Fisherbrand™ Benchtop Centrifuges combine a compact size with operational flexibility, making them the ideal choice for molecular biology laboratories. Available in ventilated or refrigerated versions.
Max. Speed | 4,350 rpm |
---|---|
Rotor Included | Yes |
Warranty | 2 Years (Centrifuge), 5 Years (Rotor) |
Program Storage | Four direct access programs |
Max. RCF | 3,046 x g |
Rotor | TX-150 |
Safety Features | ClickSeal biocontainment lid |
Includes | TX-150 rotor, ClickSeal lid, four adapters for 4x50mL conical tubes, four adapters for 8x15mL conical tubes |
Type | Benchtop Centrifuge |
Drive System | Direct Brushless Induction |
Capacity | 4 x 145 mL |
Voltage | 230 V |
Frequency | 50/60 Hz |
Run Time | 10 sec. to 99 hr. 59 min. |
Certifications/Compliance | IEC 61010-1, IEC 61010-2-020, IEC 61010-2-101, EN 61326-1, UL Listed, CE marked, Certified biocontainment |
Thermo Scientific™ SL4 Plus Centrifuge Series
Faster processing of more samples with a high capacity-to-footprint ratio and simple programming interface, plus the flexibility to run most tubes and bottles on one centrifuge.
Type | Benchtop Centrifuge |
---|---|
Timer | Option to count up or down |
Program Storage | Up to 6 Programs via LCD User Interface buttons |
Drive System | Direct, Brushless Induction Low Profile |
For Use With (Equipment) | Purchase of Thermo Scientific rotor and accessories required for operation |
Profile (Acceleration/Braking) | Choices of 9 Accel/10 Decel Rates |
Controller Type | Microprocessor |
Model | SL4 Plus |
Run Time | Up to 9 hr. 59 min. |
Certifications/Compliance | EN/UL/IEC 61010-1EN/UL/IEC 61010-2EN/UL/IEC 61326-1EN/UL/IEC 61326-2FCC part 15 |
Standards | ISO 14971, ISO 13485, ISO 9001 |
Display | Bright LCD Push-Button User Interface |
Thermo Scientific™ SL1 Plus Centrifuge Series
Ergonomic design, standard high contrast user interface for up to 6 saved programs with simple push-button operation for routine applications.
Max. Speed | 15,200 rpm (Microliter 30 x 2 rotor) |
---|---|
Rotor Included | No |
Program Storage | Up to 6 programs via push button and high contrast LCD interface |
Memory | stores up to 6 programs |
Profile (Acceleration/Braking) | 9 Accel/10 Braking |
Controller Type | Microprocessor |
Quantity | Each |
Green Features | Energy efficient, less waste |
Max. RCF | 25,830 x g (Microliter 30 x 2 Rotor) |
Safety Features | SMARTSpin Imbalance detection, finger-pinch prevention, crash-proof construction |
Includes | rotor needs to be purchased separately |
Type | General Purpose Centrifuge |
Drive System | Direct, Brushless Induction Low Profile |
Capacity | 4 x 400 mL with TX-400 Rotor |
Display | LED |
Thermo Scientific™ SL4F Plus Centrifuge Series
Ergonomic design, standard high contrast user interface for up to 6 saved programs with simple push-button operation for routine applications.
Max. Speed | 15,200 rpm (Microliter 30 x 2 rotor) |
---|---|
Rotor Included | No |
Program Storage | Up to 6 programs via push button and high contrast LCD interface |
Memory | Stores up to 6 programs |
Profile (Acceleration/Braking) | 9 Accel/10 Braking |
Controller Type | Microprocessor |
Quantity | Each |
Green Features | Energy efficient, less waste |
Max. RCF | 25,830 x g (Microliter 30 x 2 Rotor) |
Safety Features | SMARTSpin Imbalance detection, finger-pinch prevention, crash-proof construction |
Dimensions (HWD) | 32.8 x 22.3 x 27.2 in. (83.5 x 56.6 x 69 cm) |
Includes | Rotor needs to be purchased separately |
Type | General Purpose Centrifuge |
Drive System | Direct, Brushless Induction Low Profile |
Capacity | 4 x 1000 mL with TX-1000 Rotor |
Voltage | 208/230 V |
Certifications/Compliance | EN/UL/IEC 61010-1, EN/UL/IEC 61010-2-020 and 61010-2-101, EN/UL/IEC 61326-1, EN/UL/IEC 61326-2-6, FCC part 15 |
Display | High Contrast LCD, Push Button |
Thermo Scientific™ Megafuge ST1 Plus Centrifuge Series
Ergonomic design, standard high contrast user interface for up to 6 saved programs with simple push-button operation for routine applications.
Max. Speed | 15,200 rpm (Microliter 30 x 2 rotor) |
---|---|
Rotor Included | No |
Program Storage | Up to 6 programs via push button and high contrast LCD interface |
Memory | Stores up to 6 programs |
Profile (Acceleration/Braking) | 9 Accel/10 Braking |
Controller Type | Microprocessor |
Quantity | Each |
Green Features | Energy efficient, less waste |
Max. RCF | 25,830 x g (Microliter 30 x 2 Rotor) |
Safety Features | SMARTSpin Imbalance detection, finger-pinch prevention, crash-proof construction |
Includes | Rotor needs to be purchased separately |
Type | General Purpose Centrifuge |
Drive System | Direct, Brushless Induction Low Profile |
Capacity | 4 x 400 mL with TX-400 Rotor |
Certifications/Compliance | EN/UL/IEC 61010-1, EN/UL/IEC 61010-2-020 and 61010-2-101, EN/UL/IEC 61326-1, EN/UL/IEC 61326-2-6, FCC part 15 |
Display | LED |
Thermo Scientific™ Sorvall ST1 Plus Centrifuge Series
Ergonomic design, standard high contrast user interface for up to 6 saved programs with simple push-button operation for routine applications.
Max. Speed | 15,200 rpm (Microliter 30 x 2 rotor) |
---|---|
Rotor Included | No |
Program Storage | Up to 6 programs via push button and high contrast LCD interface |
Memory | Stores up to 6 programs |
Profile (Acceleration/Braking) | 9 Accel/10 Braking |
Controller Type | Microprocessor |
Quantity | Each |
Green Features | Energy efficient, less waste |
Max. RCF | 25,830 x g (Microliter 30 x 2 Rotor) |
Safety Features | SMARTSpin Imbalance detection, finger-pinch prevention, crash-proof construction |
Includes | Rotor needs to be purchased separately |
Type | General Purpose Centrifuge |
Drive System | Direct, Brushless Induction Low Profile |
Capacity | 4 x 400 mL with TX-400 Rotor |
Certifications/Compliance | EN/UL/IEC 61010-1, EN/UL/IEC 61010-2-020 and 61010-2-101, EN/UL/IEC 61326-1, EN/UL/IEC 61326-2-6, FCC part 15 |
Display | LED |
Thermo Scientific™ Megafuge ST4 Plus Centrifuge Series
Faster processing of more samples with a high capacity-to-footprint ratio and simple programming interface, plus the flexibility to run most tubes and bottles on one centrifuge.
Type | Benchtop Centrifuge |
---|---|
Timer | Option to count up or down |
Program Storage | Up to 6 Programs via LCD User Interface buttons |
Drive System | Direct, Brushless Induction Low Profile |
For Use With (Equipment) | Purchase of Thermo Scientific rotor and accessories required for operation |
Profile (Acceleration/Braking) | Choices of 9 Accel/10 Decel Rates |
Controller Type | Microprocessor |
Run Time | Up to 9 hr. 59 min. |
Standards | ISO 14971, ISO 13485, ISO 9001 |
Display | Bright LCD Push-Button User Interface |
Product Line | Megafuge |
Thermo Scientific™ Multifuge X4F and X4FR Pro Centrifuges
Ergonomically designed, Pro series touch screen enables easier programming for quicker results--plus easily access and track all runs, rotor life and centrifuge health
Laboratory/Cleanroom Use | Cleanroom compatibility Class ISO 7 according to DIN EN ISO 14644-1 |
---|---|
Max. Speed | 15,200 rpm (Microliter 30 x 2 rotor) |
Rotor Included | No |
Program Storage | Up to 100 programs via full color touch screen interface |
Memory | Stores up to 100 programs |
Profile (Acceleration/Braking) | 9 Accel/10 Braking |
Controller Type | Microprocessor |
Quantity | Each |
Green Features | Energy efficient, less waste |
Max. RCF | 25,830 x g Fixed Angle (with microliter 30 x 2 mL rotor); 7,197 x g Swing-Out (with H-Flex HS4 rotor) |
Rotor | 18 Rotor options available |
Safety Features | SMARTSpin Imbalance detection, finger-pinch prevention, crash-proof construction |
Dimensions (HWD) | 32.8 x 22.3 x 27.2 in. (83.5 x 56.6 x 69 cm) |
Includes | Rotor needs to be purchased separately |
Type | General Purpose Centrifuge |
Drive System | Direct, Brushless Induction Low Profile |
Capacity | 4 x 1000 mL BioBottles, 196 x 5/7 mL Blood Tubes, 148 x 9/10 mL Blood Tubes, 96 x 15 mL Conical Tubes, 40 x 50 mL Conical Tubes, 4 x 6 Microplates with TX-1000 Rotor |
Certifications/Compliance | EN/UL/IEC 61010-1, EN/UL/IEC 61010-2-020 and 61010-2-101, EN/UL/IEC 61326-1, EN/UL/IEC 61326-2-6, FCC part 15 |
Display | Full Color Touch Screen Interface |
Thermo Scientific™ Sorvall X4F and X4FR Pro Centrifuges
Ergonomically designed, Pro series touch screen enables easier programming for quicker results--plus easily access and track all runs, rotor life and centrifuge health.
Laboratory/Cleanroom Use | Cleanroom compatibility Class ISO 7 according to DIN EN ISO 14644-1 |
---|---|
Max. Speed | 15,200 rpm (Microliter 30 x 2 rotor) |
Rotor Included | No |
Program Storage | Up to 100 programs via full color touch screen interface |
Profile (Acceleration/Braking) | 9 Accel/10 Braking |
Controller Type | Microprocessor |
Quantity | Each |
Max. RCF | 25,830 x g Fixed Angle (with microliter 30 x 2 mL rotor); 7,197 x g Swing-Out (with H-Flex HS4 rotor) |
Rotor | 18 Rotor options available |
Safety Features | SMARTSpin Imbalance detection, finger-pinch prevention, crash-proof construction |
Dimensions (HWD) | 32.8 x 22.3 x 27.2 in. (83.5 x 56.6 x 69 cm) |
Includes | Rotor needs to be purchased separately |
Type | General Purpose Centrifuge |
Drive System | Direct, Brushless Induction Low Profile |
Certifications/Compliance | EN/UL/IEC 61010-1, EN/UL/IEC 61010-2-020 and 61010-2-101, EN/UL/IEC 61326-1, EN/UL/IEC 61326-2-6, FCC part 15 |
Display | Full Color Touch Screen Interface |
Fisherbrand™ GT2 Benchtop Centrifuge Packs
The mid-sized Fisherbrand™ GT2 Benchtop Centrifuge provides speed and versatility, reaching 4238xg for fast and efficient separations
Thermo Scientific™ Megafuge ST4F Plus Centrifuge Series
Ergonomic design, standard high contrast user interface for up to 6 saved programs with simple push-button operation for routine applications.
Max. Speed | 15,200 rpm (Microliter 30 x 2 rotor) |
---|---|
Rotor Included | No |
Ventilated | Yes |
Memory | Stores up to 6 programs |
Profile (Acceleration/Braking) | 9 Accel/10 Braking |
Controller Type | Microprocessor |
Quantity | Each |
Green Features | Energy efficient, less waste |
Max. RCF | 25,830 x g (Microliter 30 x 2 Rotor) |
Safety Features | SMARTSpin Imbalance detection, finger-pinch prevention, crash-proof construction |
Dimensions (HWD) | 32.8 x 22.3 x 27.2 in. (83.5 x 56.6 x 69 cm) |
Includes | Rotor needs to be purchased separately |
Type | General Purpose Centrifuge |
Drive System | Direct, Brushless Induction Low Profile |
Capacity | 4 x 1000 mL with TX-1000 Rotor |
Certifications/Compliance | EN/UL/IEC 61010-1, EN/UL/IEC 61010-2-020 and 61010-2-101, EN/UL/IEC 61326-1, EN/UL/IEC 61326-2-6, FCC part 15 |
Display | High Contrast LCD, Push Button |